Grain Mill with 11 lb Hopper and 3 Rollers

KC KM11GM-3R






  • This Kegco grain mill is perfect for large batches and high efficiency milling as it has three rollers that will crush all of grain twice in one cycle
  • The first pass will slightly flatten the grain while the second crush breaks apart the grains and loosens the starch with minimal damage to the husk
  • The Kegco grain mill is a durable, sturdy mill with an aluminum hopper capable of holding up to 11 lbs of grain and an alloy block frame that houses two steel rollers on stainless steel ball bearings
  • This mill has a crank shift that is capable of driving both clockwise and counter-clockwise because the drive shaft and all axles are integral to the roller
  • The mill comes equipped with a hand crank though it can be easily motorized with a drill with no additional attachments needed

This Kegco grain mill is perfect for large batches and high efficiency milling as it has three rollers that will crush all of grain twice in one cycle. The initial crush though the fixed gap between the top two rollers, and then the grain passes through the second gap between the drive roller and the adjustable bottom third roller. The first pass will slightly flatten the grain while the second crush breaks apart the grains and loosens the starch with minimal damage to the husk.

This is a durable, sturdy mill with an aluminum hopper capable of holding up to 11 lbs of grain. This grain mill features an alloy block frame that houses three steel rollers on stainless steel ball bearings. The mill comes equipped with a hand crank though it can be easily motorized with a drill. No attachments are needed to use the drill, just stick the drill on and proceed.

This mill has a crank shift that is capable of driving both clockwise and counter-clockwise because the drive shaft and all axles are integral to the roller. The grain mill's gap is 6" long and easy to adjust. Adjusting is as simple as loosening the adjustment screws, adjusting the gap to preferred size, and tightening the screws. This mill now includes a black metal base that fits over common 5 gallon buckets!


Features:

 

  • 6" long adjustable gap
  • 0.060 fixed primary gap, 0-0.065 fully-adjustable secondary gap
  • Dual eccentric adjusters built from stainless steel for no galling
  • 8 lbs / minute is average throughput
  • 6" x 1.5" diameter steel rollers
  • Fully adjustable mill
  • Crankshaft can be turned clockwise or counterclockwise
  • Durable alloy frame
  • Stainless steel ball bearings

  •  


    Shipping

    Standard shipping will be applied to your order. Additional charges apply for white glove delivery into your home. Contact us at 1-888-980-4810 for white glove shipping rates.

    All Standard Shipping shipments made via Common Carrier are for curb-side service only. Use of a lift-gate or inside delivery service will carry additional charges. When receiving shipments from Common Carrier it is recommended the Buyer have two people to help receive and move the item. Please contact us for white glove service deliveries.

    No shipments or deliveries are made on Saturdays, Sundays, and holidays. Kegco is not responsible for delays in shipping due to weather, mechanical failures, typographical and/or transcribing errors, and others factors beyond our control.